Home    About Us    News    Products    Contact Us    Management    Careers   
TW/Chinese    

   Up | Dome Type | In-line Type | FTTH Type, Small | FTTH Type, Medium | FTTH Type, Large

 
Passive Equipment
Fiber Optic Joint Closures
 
Fiber Optic Joint Closures - Dome Type

When your fiber needs to be spliced and well protected.

Model BS604A Fiber Optic Joint Closure protects the fiber optic splices from harsh external environment conditions. The Fiber Optic Splices are enclosed in a ribbed polypropylene dome construction that shows good mechanical characteristics as well as high environmental protection features and thereby provides a reliable and well proven sealing performance over time.

The Joint closure construction enables a fast and easy no-cost re-entry. It can be installed on wires, in manholes, ducts as well as mounted directly on poles. With its six entry ports, the box can be mounted both as an in-line as well as a mid-span branching joint closure.

 

 

 Features
 

 
  The body consists of two parts, the Base or Cable Inlet and Ribbed Cover Dome. The ribbed cover dome has an air valve for tightness test and is sealed and clamped to the base with a gasket and band clamp for maximum tightness.
 
  The base has 6 inlet ports. The splice tray supporter is attached on the opposite side of the cable inlet.
 
  There are 4 entry / exit location on each splice tray. Both loose tube and ribbon management is possible.
 
 
  The OSP cable clamping is done by using a tension member gripper for clamping the cable’s central strength member to the box and a hot melt type heat shrink tube that enables cable sheath sealing.
 
 
  The LAP ground connector and ground wire are offered for grounding of OSP cables.
 
 
  Hangers are provided for various installation environments.  
   
 
 
   Technical Specification
 
 
       
 

Size (mm)

522 * 208 *174

522 * 208 *174

Weight (kg)

2

2

Inlet ports

6

6

Cable diameter (mm)

Ø 8 - Ø 24

Ø 8 - Ø 24

Number of splice trays

4 up to 6

4

Tray capacity

12F up to 24F

12F

Splice capacity

48F up to 96F

48F

Splicing method

Fusion

Mechanical

Splice protector

Heat shrinkable sleeve

Mechanical splice

Tension member

Galvanized steel wire, FRP, wire

Galvanized steel wire, FRP, wire

 

 
 

Downloads

 

 Product Information Sheet (.pdf)

 

 Raycore Fiber Optic Joint Closure Catalogue
 (.pdf)

 


 
BS604A Dome Type Joint Closure
 
 
 
 
 
 

Copyright 2007 Raycore Fiber Optic Solutions AB. All rights reserved.